[PERSONAL INJURY · OTHER LIABILITY]

Product liability cases

A product case starts with the product. Preservation comes before everything else on this list.

Last reviewed

Deadline, fault rule and coverage for this kind of case, with sources.

The records that decide it

Covers auto defects, medical devices and implants, drugs, and consumer products. Which defect theories are available, and against whom, is set by state law; Texas examples are cited below.

  1. The product, preserved

    Held by Client, family, insurer, hospital, tow yard

    Whether it is preserved, who has it, and any testing or changes since the incident.

    Often missing. Products get thrown away, repaired or returned to the seller. Send preservation letters to whoever holds it.

  2. Identification

    Held by Client, packaging, purchase records

    Maker, model, serial or lot number, the date it was made, and where and when it was bought. In Texas, the sale date starts a 15-year statute of repose against the manufacturer or sellerSource 1 § 16.012(b): Tex. Civ. Prac. & Rem. Code § 16.012, with exceptions for longer written useful-safe-life warranties and some latent-disease claimsSource 1 § 16.012(c)–(d): Tex. Civ. Prac. & Rem. Code § 16.012.

  3. Chain of distribution

    Held by Retailer, distributor, maker

    Designer, maker, component maker, distributor, retailer and installer, each with its own policy. In Texas, a component maker counts as a manufacturerSource 2 § 82.001(4): Tex. Civ. Prac. & Rem. Code § 82.001, but a retailer or distributor that didn’t make the product is liable only in the situations listed in § 82.003(a), such as installing or altering it, knowing of the defect, or when the maker is insolvent or beyond the court’s jurisdictionSource 3 § 82.003(a)(1)–(7): Tex. Civ. Prac. & Rem. Code § 82.003.

  4. Warnings, instructions and use

    Held by Maker, client

    The warnings and instructions that came with it, and any modification, misuse or maintenance the defense will raise.

  5. Recalls and government reports

    Held by NHTSA, CPSC, FDA

    Recalls and complaint or adverse-event reports for the same product, and similar incidents and lawsuits. In Texas, compliance with mandatory federal safety standards creates a rebuttable presumption of no liability for formulation, labeling or designSource 4 § 82.008(a): Tex. Civ. Prac. & Rem. Code § 82.008, so the standards and the maker’s compliance records matter too.

  6. Auto defects

    Held by Vehicle owner, maker, expert

    The airbag module, seat belts, tires and the vehicle itself, and any crashworthiness findings.

  7. Medical devices and implants

    Held by Hospital, surgeon, pathology lab

    The implant record, the removal or revision operative report, and pathology on the explanted device.

    Often missing. Explanted devices can be discarded or sent back to the maker unless someone asks the hospital to hold them.

  8. Drugs

    Held by Prescriber, pharmacy

    Prescription and pharmacy records, and what the prescribing doctor knew about the risk. In Texas, a failure-to-warn claim on a drug faces a rebuttable presumption of no liability if the warnings were the FDA-approved onesSource 5 § 82.007(a)(1): Tex. Civ. Prac. & Rem. Code § 82.007.

  9. Multidistrict litigation or mass tort status

    Held by Federal court dockets

    Whether the product is part of an MDL or mass tort. If it is, the claim may be resolved through a settlement program with its own claim forms.

How the chronology is built

Product injuries often follow a long course: a failed device, a revision surgery, a drug’s side effects over time. The chronology keeps every step in order.

  1. Every encounter, in order and page-cited

    Every encounter, diagnosis, procedure and bill, in order and page-cited.

  2. Prior conditions, separated

    Treatment before the incident sits apart from the injury, so causation reads cleanly.

  3. Every bill tied to its visit

    Every charge tied to its encounter. A bill with no visit note gets flagged for request.

  4. Conflicting dates resolved, originals kept

    When a record’s own dates conflict, the entry uses the right one and keeps the original visible.

What moves the number

The facts that tie the injury to the product and show the maker knew.

A preserved product and an expert’s defect theory
Design, manufacturing or failure to warn, as the expert states it, backed by the product itself.
Similar incidents
Recalls, government reports and earlier lawsuits about the same defect.
The medical link
For devices and drugs: the revision report, pathology and the prescriber’s knowledge, in order on one timeline.
Every scored fact stated plainly
Many insurers score bodily-injury claims with software, so each diagnosis, treatment and lasting limitation should be written out where an adjuster can enter it. See how Colossus reads a demand.

Where cases go wrong

How to use this page

This is a records checklist for plaintiff firms, not legal advice. Federal rules are quoted from eCFR with the date we read them. State law (deadlines, fault rules, caps, notice requirements) varies and is covered on the state-law pages.

Sources

  1. Tex. Civ. Prac. & Rem. Code § 16.012 · Texas Legislature (statutes current through the 89th Leg., 2nd C.S., 2025)

    “(b) Except as provided by Subsections (c), (d), and (d-1), a claimant must commence a products liability action against a manufacturer or seller of a product before the end of 15 years after the date of the sale of the product by the defendant.”

    Checked

  2. Tex. Civ. Prac. & Rem. Code § 82.001 · Texas Legislature (statutes current through the 89th Leg., 2nd C.S., 2025)

    “(4) "Manufacturer" means a person who is a designer, formulator, constructor, rebuilder, fabricator, producer, compounder, processor, or assembler of any product or any component part thereof and who places the product or any component part thereof in the stream of commerce.”

    Checked

  3. Tex. Civ. Prac. & Rem. Code § 82.003 · Texas Legislature (statutes current through the 89th Leg., 2nd C.S., 2025)

    “(a) A seller that did not manufacture a product is not liable for harm caused to the claimant by that product unless the claimant proves: (1) that the seller participated in the design of the product; (2) that the seller altered or modified the product … (3) that the seller installed the product … (4) … exercised substantial control over the content of a warning or instruction … (5) … made an express factual representation … (6) … actually knew of a defect … or (7) that the manufacturer of the product is: (A) insolvent; or (B) not subject to the jurisdiction of the court.”

    Checked

  4. Tex. Civ. Prac. & Rem. Code § 82.008 · Texas Legislature (statutes current through the 89th Leg., 2nd C.S., 2025)

    “(a) … there is a rebuttable presumption that the product manufacturer or seller is not liable for any injury to a claimant caused by some aspect of the formulation, labeling, or design of a product if the product manufacturer or seller establishes that the product's formula, labeling, or design complied with mandatory safety standards or regulations adopted and promulgated by the federal government”

    Checked

  5. Tex. Civ. Prac. & Rem. Code § 82.007 · Texas Legislature (statutes current through the 89th Leg., 2nd C.S., 2025)

    “(a) In a products liability action alleging that an injury was caused by a failure to provide adequate warnings or information with regard to a pharmaceutical product, there is a rebuttable presumption that the defendant or defendants … are not liable … if: (1) the warnings or information that accompanied the product in its distribution were those approved by the United States Food and Drug Administration”

    Checked

  6. Brookshire Bros., Ltd. v. Aldridge, No. 10-0846 (Tex. July 3, 2014) · Supreme Court of Texas (official slip opinion, search.txcourts.gov; opinion delivered July 3, 2014)

    “we hold that a trial court’s finding of intentional spoliation pursuant to the analysis set forth above is a necessary predicate to the proper submission of a spoliation instruction to the jury.”

    Checked

Bring us a case.

See what it feels like when the follow-up isn’t yours. We’ll run it through Thereby and walk your team through the output, record by record. Then you decide.